CO1224TR - Honeywell System Sensor Hardwired Conventional 4-Wire 12/24-Volt Carbon Monoxide Detector (w/RealTest Technology)

Description
PDF Documents
Specifications

Honeywell Home CO1224TR Product Description:

The Honeywell System Sensor CO1224TR is a round carbon monoxide detector, with a highly accurate and reliable electrochemical sensing cell, used to provide early warning of dangerous CO levels. The CO1224T is a 12/24 volt, 6-wire, system-monitored carbon monoxide detector with RealTest Technology.

The CO gas sensing cell used in the CO1224TR carbon monoxide detector can be tested using a CO gas agent, fully meeting the requirements of NFPA 720: 2009. Simply put the detector into RealTest mode, spray a small amount of CO into the detector per the installation instructions, and within seconds the detector will alarm, indicating successful gas entry.

When dangerous amounts of CO are detected, the CO1224TR carbon monoxide detector alert residents by sounding and flashing a temp 4 signal alarm. With 24/7 GeoArm central station monitoring, residents are guaranteed protection whether they are away from home, sleeping, or already suffering from the effects of CO.

The CO1224TR carbon monoxide detector is designed for system operation. This carbon monoxide detector is fully listed to UL 2075 and offer a code-required trouble relay to send a sensor failure or end-of-life signal to the control panel and GeoArm's nationwide central monitoring station. The CO1224TR also uses SEMS-type terminal Philips head screws for quicker and more positive wiring connections and code-requiring wiring supervision. With a low current draw, this carbon monoxide detector enables more devices to be connected to the alarm control panel, limiting the need to purchase extra power supplies or more expensive replacement panels. As 12/24VDC detectors, the CO1224TR will operate on most existing security and fire alarm control panels.

Product Features:

RealTest™ enables a functional test using canned CO
Full compliance with UL 2075
Six-wire, system monitored
Local sounder
Alarm relay, Form C
Trouble relay, Form A
Dual LED's
Test/Hush button
Optional drywall anchors included
Test/Hush button
A code-required trouble relay
Wiring supervision with SEMS terminals
A six-year end-of-life timer
12/24 VDC
A low current draw of 20mA in standby and 40mA in alarm
Versatile mounting for wall and ceiling
Accurate and reliable electrochemical sensing technology
Optional CO-PLATE CO Detector Replacement Plate to upgrade previously installed competitor detectors

Honeywell Home CO1224TR Product Documents:

• Data Sheet for Honeywell Carbon Monoxide Detector (CO1224TR)
• Brochure for Honeywell Carbon Monoxide Detector (CO1224TR)
• Installation Guide for Honeywell Carbon Monoxide Detector (CO1224TR)

Honeywell Home CO1224TR Product Specifications:

Dimensions: Diameter: 6.0 in (152 mm), Height: 1.3 in (33 mm)
Operating Temperature Range: 32°F to 104°F (0°C to 40°C)
Operating Relative Humidity: 22-90% RH
Weight: 11 oz (312 g)
Wire Gauge Acceptance: 14-22 AWG
Mounting: Single-gang back box; surface mount to wall or ceiling
System Voltage: Nominal: 12/24VDC | Minimum: 10VDC | Maximum: 33VDC
Average Standby Current: 20 µA
Maximum Alarm Current: 40 mA (75 mA test)
Alarm Contact Ratings: 30 VDC @ 0.5 A
Trouble Contact Ratings: 30 VDC @ 0.5 A
Audible Signal (temp 4 tone): 85 dBA min. in alarm (at 10ft)
Max. Start-up Capacitance: 20 uF

Product Reviews

Other customers rated this item:
5 out of 5 stars

WRITE A REVIEW(Reviews are subject to approval)

This is a great value for CO Detection!, May 12, 2023

Posted By: Benjamin V
13 people found this review helpful

Affordable monitoring with GeoArm and great deals on products such as this inexpensive System Sensor carbon monoxide detector which I got wired into my GE NetworX panel. Besides running the wire on my end, this was simple to add/program into my Geoarm account with the help of their tech team.